Wine Filters - Beer Filters - Filter Pads

The Buon Vino MiniJet has been designed with the small quantity winemaker in mind. It is the perfect way for the home hobbyist to produce a wine with a commercial shine. Perfect for the home winemaker who filters 23L (6 Gallons) at a time from kits or basically fresh fruit wines. Its compact design incorporates a self-prime motorized pump capable of filtering up to 23 liters in 15 - 20 minutes. A built in drip tray and drainage tube ensure a no mess, no fuss clean-up job. And its triple filter pads add a crystal clear, sparkling quality to your wine. Technical Specifications; Self-prime pump with incorporated motor (cool down required every 20 - 30 minutes of filtering), Filtering surface 465 square cm, 23 litre jug (approximate) per 15 - 20 minutes, 3 grades of pads (purchased separately), Coarse, Polish and Sterilizing. Dimensions; 30 cm (length) x 14 cm (width) x 18 cm (height). Weight; 3 kilograms C.S.A. approved. For best recommended cost effectiveness the Buon Vino MiniJet filter should be used no more then once or twice a week (on average) for filtering 23 liters (6 gallons) of wine in one “session”. If more filtering is anticipated please consider the Buon Vino SuperJet filter.

Mini Jet Filter Pads by Buon Vino. Each package contains 1 set of filter pads (quantity of 3). 3 filter pads are required to operate filter. All Buon Vino wine filters have been designed to use ORIGINAL Buon Vino Filter Pads. The micron sizes and consistency of Buon Vino Filter Pads have been designed to give optimal performance when used with Buon Vino wine filters. The flow rate of the pump is designed to work in conjunction with the Buon Vino Filter Pads to give you the best filtration possible. Choose, Coarse, micron rating 6.0, Polishing, micron rating 1.0 or Sterile, micron rating .5. Each pack of Mini Jet Filters is estimated to filter 30 litres (7.5 gallons) of wine depending on beginning clarity. Wine that has had a fining agent added before filtering may use twice as many filter pads.

The Buon Vino SuperJet is rated to be cost effective at filtering up to 120 gallons of wine per week, enough capacity for a small family winery. Ideal for clarifying any wine, giving it the brilliance and sparkle that previously was only achieved in commercial wines; the Buon Vino SuperJet is a professional advancement in home wine making made easy. The Buon Vino SuperJet has been designed with ease and quality in mind. Wine is drawn by means of a self-prime pump into the plastic filtering plates which house the filter pads. The specially designed grooves on the plastic filtering plates direct the wine through the filter pads, allowing the unit to achieve optimum filtering capability. Pre-Filter large particles using the #5269 pre-filter to extend pump life for best results. Technical Specifications; Self-prime pump with incorporated motor with cooling fan for continuous operation, Filtering surface 1200 square cm, 270 liters (approximate) per hour, 3 grades of pads (purchased separately), Coarse, Polish(Sterile) and Sterilizing(Super Sterile). Dimensions; 49 cm (length) x 26 cm (width) x 46 cm (height). Weight; 13 kilograms and C.S.A. approved.

All Buon Vino wine filters have been designed to use ORIGINAL Buon Vino Filter Pads. 3 FILTER PADS PER PACK. 3 filter pads are required to operate filter. The micron sizes and consistency of Buon Vino Filter Pads have been designed to give optimal performance when used with Buon Vino wine filters. The flow rate of the pump is designed to work in conjunction with the Buon Vino Filter Pads to give you the best filtration possible. Choose, Coarse, micron rating 6.0, Polishing, micron rating 1.0 or Sterile, micron rating .5. Each pack of Super Jet Filters is estimated to filter 60 litres (15 gallons) of wine depending on beginning clarity. Wine that has had a fining agent added before filtering may use MORE Filter pads.

This pre-filter for the Buon Vino Super Jet Filter, will preserve and lengthen the life of the check valve, by ensuring that no large particles like oak chips, grape skins, tartaric crystals etc. are allowed into the pump, prematurely damaging the check valve.

The first Vinbrite wine filter was originated way back in 1966. Over the years, this filter kit has constantly been updated to keep at the forefront of home wine filtration. As Harris Filters have for some time been researching new filter media, the Vinbrite filter kit has now been slightly modified to include certain changes that will considerably increase its performance. The Vinbrite instruction express that wine makers make sure that fermentation is completed before filtering. Whenever gas bubbles are seen rising in the transfer tube, this indicates that the wine is still working. In such cases, filtering should be stopped and the wine ferment out completely. However, wine makers are often impatient and will frequently try to filter unstable wines. When filtering and handling wine in general, minute gas bubbles may be released as the wine is disturbed resulting in a back pressure buildup in the filter body, which can also affect performance. The revised filter kit has now been designed to enable the winemaker to release any trapped air whilst filtering via the vent tube and tap. The updating of this unique filter kit will keep the Vinbrite to the forefront of home wine filtration and will enable wine makers to filter wine more quickly to professional standards. The new hi-tech Crystalbrite pads are slightly thicker than the previous ones. They are extremely efficient when compared to any other filtering media. This means that, all wines, whether country or kit wines can be filtered to crystal-clear perfection, easier, quicker and more efficiently than ever before. The VINBRITE MK3 kit includes a filter body, support disc, locking ring, funnel, spanner, transfer tube, flow control clip, 6 Crystalbrite filter pads, Super Enzyme and Vin Clear sachets together with full instructions. All parts are easy to clean and sanitize. Filtering is as simple as this .... 1. The Crystalbrite pad is inserted inside the filter body. The Crystalbrite pads can be fitted either way in the filter body. 2. The support disc is placed on top of the pad with the side marked 'A' facing the filter pad and with the three lugs located into the slots of the filter body. 3. Next screw the locking ring into the filter body to secure the pad being careful not to cross the thread. Tighten the locking ring with the spanner provided (see photograph). 4. Attach the funnel to the filter body. 5. It is first necessary to rinse the pad with tap water which swells the pad material and also removes any loose fibers. The filter is then ready for filtering the wine. Always use Crystalbrite brand pads for best performance.

Crystalbrite filters combine a very high flow rate with superb filtration quality. Use with the Vinbrite Mark III filter unit. Package of six, non-asbestos, 15 cm pads.

Place under the Crystalbrite filter pad in the Vinbrite Mark III filter unit to prevent loose partices from the filter pads themselves from entering the wine. Highly recommended when entering wines in competitions. Package of 48.

The CarbonSnake Carbon Purification Filter - The Carbon Snake is an inexpensive, easy-to-use carbon purification system. It will remove unwanted odors and flavors from fermented alco bases such as, distillers yeast with nutrient blends, SuperYeast, turboyeast, etc and ethanol distillates, that is grain or sugar alcohols. Device requires 2 oz or 60 grams of distillers granular activated carbon, GAC, included with kit. Affixes to any sized plastic pail (not included) with included shut off valve, hose and connectors.

CarbonSnake Granular Activated Carbon - Asst Sizes - The Carbon Snake requires 3 oz or 85 grams of distillers granular activated carbon, GAC. Refills available in 85 gm or 500 gram bulk.

Super Vinpro Transfer Pump with prefilter and hose. The Vinpro transfer pump is quick, compact and portable and is perfect for home wine makers to save time on transferring and racking wine. Not to mention no more lifting heavy carboys. Transferring from carboy to carboy has never been faster and easier! The Vinpro Super Transfer Pump specifications are Self Priming, Automatic Shut off (Thermally Protected Motor) and Adjustable Flow Rate of 1 to 3 gallons per minute. Can run continuously for 90 minutes. Comes with a 40 mesh prefilter and two, 3 foot flexible tubing. Max liquid temp 110 deg F.

Pre-Filter for Super Vinpro Transfer Pump. Replacement for original. Should always be used if wine contains any oak chips or particles so as not to damage pump.

Wine Transfer Pumps. Commercial quality pumps for transferring wine throughout the wine production facility. The bronze model is recommended for the advanced home winemaker and small winery. 120 volt electric, self-priming, impeller pump transfers 14 gallons of juice per minute at a 3 foot lift. Runs at a low 1400 rpm which handles the wine or juice more softly. Two 10 foot lengths of Enological tubing are included. Weighs about 25 lbs with hose.

Enolmatic Wine Bottle Filler. The Enolmatic bottle filler is perfect for the home winemaker or small scale winery. Capacity is up to 200 bottles per hour. Through the use of a vacuum pump, the Enolmatic filler automatically starts a siphon and automatically shuts off when the bottle is filled to the perfect height. The vacuum also serves to evacuate most of the oxygen from your bottle. The Enolmatic creates a vacuum that sucks the wine directly from your fermenter, storage tank, or barrel, which can be located up to 13 feet below the Enolmatic. No need to start a siphon or to have to pump or move your wine above your filling machine. Fill speed can be adjusted allowing you to bottle at your preferred pace. While the filler is in operation wine is not allowed back into the storage tank or barrel due to a one-way valve located in the fill head. The small amount of excess wine runs into a collection reservoir. The fill height can be adjusted and is designed to be used with almost all size or type of bottle. The Enolmatic has a continuous duty cycle, meaning it can run non-stop and is constructed entirely from food-grade materials. Simply run water through the system to clean out the lines. The reservoir for excess overfill can be rinsed out or ran through the dishwasher. Includes: Filling Unit with Overflow Reservoir. 5ft. of 1/2 inch ID Feeder Line. Collapsible 1/2 inch racking cane for intake, helps leave the lees behind. Detailed Instructions.
VIDEO CAN BE FOUND AT http://www.youtube.com/watch?v=EzxnPUHapGU

MINI JET FRONT PLASTIC PLATE WITH TWO HOSE PORTS. Plastic Filter Plate for MINI Jet - closest to hand cranks. Fits only Buon Vino Mini Jet wine filters.

Pressure Gauge only for Super Jet - 0 to 30 lbs. Replacement pressure gauge for SuperJet wine filters. Apply Teflon tape to threads before installing. 0-30 lbs. (brands vary) FE03G07140

Check valve and o-ring set for Super Jet Wine Filter with D48 motor only. Check your motor model number! The motor model number is just above the serial number and should start with a D48! Instructions to replace check valve for Superjet model D48XXXXX. 1. Unbolt the motor from the frame. 2. Turn the pump head towards you. You will notice 4 screws, take them out. 3. Remove the black pump head. 4. Remove the check valve. 5. On the check valve is the seal ring, remove it. 6. Remove the screen to make sure it is clean in behind. It would be a good idea to rinse everything out with water. Note: It is not necessary to put the screen back in, only if you wish. 7. Insert the new seal ring into the check valve. 8. Insert the new check valve into the pump head. At this point the inside should face flush. 9. Place the pump head back on the motor and replace the screws. Make sure you reassemble the hoses to the correct fitting. Then replace the whole unit on the frame as it was before you started. 10. It may on occasion happen that you will not get an immediate prime due to the check valve and seal ring being dry. Put your inlet tube up the tap and force water through to the pump, this should help prime it. (If your SuperJet is a model no 2000 series, please contact Buon Vino directly)

SUPER JET BACK PLASTIC PLATE WITH TWO HOSE PORTS AND PORT FOR GAUGE. (PRESSURE GAUGE IS NOT INCLUDED) Filter Plate for Super Jet - CLOSEST to the motor. Fits only Buon Vino SuperJet wine filters.

SUPER JET CENTRAL PLASTIC PLATE. Filter Plate for SuperJet - CENTRAL PLATE. Fits only SuperJet wine filters.

SUPER JET FRONT PLASTIC PLATE WITH FINS. Filter Plate for Super Jet - FARTHEST from the motor - with fins. Forgot to put the metal plate on before tightening down the pressure plates? Replacement FRONT plate with fins to replace broken one. Fits only SuperJet wine filters.

THIS IS A REPLACEMENT PART. YOU DO NOT NEED THIS ITEM WITH A NEW SUPER JET WINE FILTER AS IT ALREADY COMES WITH ONE. ONLY NEEDED IF YOU BREAK THE ORIGINAL ONE THAT COMES WITH THE SUPER JET WINE FILTER.

Filler Nozzle Tip for Buon Vino Fill Jets - Black

90 Degree Hose Fitting for Super Vinpro Transfer Pump. Replacement for original or purchase and replace the pre-filter to transfer FINISHED wine. Wine should be free of ANY oak chips or particles so as not to damage pump. Otherwise continue to use the pre-filter.