Back to School Sale

The brass stem on a regulator, this one is right-hand threaded.A brass regulator stem is the part that protrudes out from your regulator and attach...

The brass stem on a regulator, this one is left-hand threaded.A brass regulator stem is the part that protrudes out from your regulator and attache...

A connection for adapting your CO2 regulator for use with a beer gas tank!Use your CO2 regulator with a beer gas tank with this CO2 regulator to ni...

A left-hand threaded brass union for regulators.This left-hand threaded brass union is used on regulators and other CO2 and gas connections. It is ...

Regulate gas to multiple pressures with this secondary regulator!Do you often carbonate and serve beer at the same time? If so, or if you would lik...

A pass through regulator allows you to regulate the pressure to one keg while allowing CO2 to flow to another keg or device.Want to regulate to a s...

This 0–15 PSI serving pressure gauge mounts on the low-pressure side of your CO2 regulator to monitor draft beer carbonation pressure. Right-hand t...

A replacement right-hand thread tank pressure gauge. Have you ever damaged a gauge on your CO2 regulator? We've got the replacements you need! This...

A right-hand threaded brass union for regulatorsThis right-hand threaded brass union is used on regulators and other CO2 and gas connections. It is...

Shutoff valve with 1/4 in. MPT threads and 3/8 in. barb. Features a check valve which allows for one-way flow (1/4 in MPT >> 3/8 in. barb). G...

Protect your investment and maintain accuracy with a rubber gauge boot. This heavy-duty, flexible boot is designed to fit standard 2-inch regulator...

Barbed hose stem featuring a 1/4 in Barb to 1/4 in male flare fitting (MFL). All stainless steel constructionBarbed hose stem featuring a 1/4 in Ba...

A stainless steel splicer that has 1/2" hose barbs on each side.A stainless steel splicer that has 1/2" hose barbs on each side.Features Length:  2...

This one-piece swivel nut and stem (1/4" FFL × 1/2" barb) makes secure, leak-free connections simple. Built with a stainless steel stem and chrome-...

This stainless steel fitting connects a 3/8 in. male pipe thread port to standard 1/2 in. ID brewing hose in a single piece. Stainless construction...

A 1/4 in. female threaded NPT fitting with a 1/4 in. barb, made of stainless steelA 1/4 in. female threaded NPT fitting with a 1/4 in. barb, made o...

Stainless Steel Tee with 1/2 in. barbs on all sides.Stainless Steel Tee with 1/2 in. barbs on all sides.

Great for running liquid/gas lines through Jockey Boxes MFL fittings hook up with existing homebrew equipment Stainless Steel construction! Need t...

Product Highlights- Great for running liquid/gas lines through Jockey Boxes- MFL fittings hook up with existing homebrew equipment- Stainless Steel...

This adapter connects a 1/4 in. male flare fitting to a 1/2 in. male pipe thread port, bridging two common gas line standards in a single piece. An...

A tailpiece that allows you to quickly switch between sanke and ball/pin lock connections.Do you have a home draft system and use both a sanke coup...

Stainless steel 4-way cross with 1/4 in. Female NPT (FPT) fittings.Stainless steel 4-way cross with 1/4 in. Female NPT (FPT) fittings.

This 3/4 in. barb to 3/4 in. male pipe thread (MPT) fitting connects barbed tubing to any standard 3/4 in. threaded port — a common connection poin...

A coupler with 3/4 in. female pipe threading on both sides. Made of high quality stainless steel that is perfect in your brewing set up! Can be us...

A stainless steel tee that has a 3/8" hose barb on the input side, with two 1/4" barbs coming off the two sides.This stainless steel tee is perfect...

Pack of 25 red nylon washers for 5/16 in. cold plate flare fittings. These washers seal the flare connections on cold plate draft systems — replace...

Snap lines on and off with zero mess. This CPC LC series 1/4 in. hose barb coupling body has an internal shut-off valve, delivering leak-free, one-...

Snap lines on and off with zero mess. This CPC LC series 3/8 in. hose barb coupling insert has an internal shut-off valve, delivering leak-free, on...

A plated brass splicer that has 3/8" hose barbs on each side.This plated brass splicer has 3/8" splicers on both sides. It can be used to connect t...

This brass hose barb connects 3/8 in. ID tubing to ports with 3/4 in. male garden hose thread — handy for wort chillers, outdoor spigots, and any b...

Brass Compression FittingsMale ElbowFemale Compression to Male Pipe ThreadSize: 1/4 C x 1/4" MPT