Cyber Monday Sale

Snap lines on and off with zero mess. This CPC HFC35 3/8 in. hose-barb coupling body has an internal shut-off valve, delivering leak-free, one-hand...

Snap lines on and off with zero mess. This CPC HFC35 1/2 in. MPT fitting insert has an internal shut-off valve, delivering leak-free, one-handed qu...

Snap lines on and off with zero mess. This CPC HFC35 1/2 in. male NPT coupling body has an internal shut-off valve, delivering leak-free, one-hande...

Snap lines on and off with zero mess. This CPC HFC35 1/2 in. hose-barb coupling body has an internal shut-off valve, delivering leak-free, one-hand...

Snap lines on and off with zero mess. This CPC APC series 3/8 in. hose barb coupling insert has an internal shut-off valve, delivering leak-free, o...

Snap lines on and off with zero mess. This CPC APC series 1/4 in. hose barb coupling insert has an internal shut-off valve, delivering leak-free, ...

A 1/4 in. by 1/4 in. barbed elbow made of a polyethylene material.This 1/4 in. by 1/4 in. barbed elbow is perfect for a number of applications that...

Get a new angle on your keg coupler!Sometimes, all you need is a new angle on life. The same applies to your keg coupler! This beer thread adapter ...

A tailpiece with a 1/2" barb for your beer needs!A bigger barb on your tailpiece for when you need it! This 1/2" tailpiece can be used for all sort...

Draft beer system tailpiece with a 1/4 in. barbed fitting.Draft beer system tailpiece with a 1/4 in. barbed fitting.

A right-hand threaded brass MPT plug.Need a hole plugged in your gas system? If the hole accepts a right hand thread connection, look no further th...

A Y-shaped connector that is perfect for use in sending CO2 to both a keg and the Blichmann BeerGun at the same time!A Y-shaped connector used to s...

Shutoff valve with 1/4 in. MPT x 1/4 in. barb fittings. Includes a check valve which allows for one-way flow (1/4 in. MPT > 1/4 in. Barb)Shutoff...

Brass Compression FittingsMale ElbowFemale Compression to Male Pipe ThreadSize: 1/4 C x 1/4" MPT

This brass hose barb connects 3/8 in. ID tubing to ports with 3/4 in. male garden hose thread — handy for wort chillers, outdoor spigots, and any b...

A plated brass splicer that has 3/8" hose barbs on each side.This plated brass splicer has 3/8" splicers on both sides. It can be used to connect t...

Snap lines on and off with zero mess. This CPC LC series 3/8 in. hose barb coupling insert has an internal shut-off valve, delivering leak-free, on...

Snap lines on and off with zero mess. This CPC LC series 1/4 in. hose barb coupling body has an internal shut-off valve, delivering leak-free, one-...

Pack of 25 red nylon washers for 5/16 in. cold plate flare fittings. These washers seal the flare connections on cold plate draft systems — replace...

A stainless steel tee that has a 3/8" hose barb on the input side, with two 1/4" barbs coming off the two sides.This stainless steel tee is perfect...

A coupler with 3/4 in. female pipe threading on both sides. Made of high quality stainless steel that is perfect in your brewing set up! Can be us...

This 3/4 in. barb to 3/4 in. male pipe thread (MPT) fitting connects barbed tubing to any standard 3/4 in. threaded port — a common connection poin...

Stainless steel 4-way cross with 1/4 in. Female NPT (FPT) fittings.Stainless steel 4-way cross with 1/4 in. Female NPT (FPT) fittings.